TRUE FOB™ Staff Test: Casegoods Packaging Standards 1. What material must cover all finished surfaces of a casegood? Plastic wrap 1/16" Microfoam Poly Sheeting Bubble wrap Fabric2. What must be used to protect the corners of casegoods? Styrofoam blocks Cardboard only Corrugate, foam, and injection molded plastic (IMP) Plastic wrap3. What must be used to fill gaps between the case and the carton walls? Air pillows Honeycomb, foam, corrugate, or corner board Loose paper Empty space is fine4. What must all cartons have 2 inches from the bottom? 'Fragile' sticker Cut line Black Line to Ground mark Label with SKU5. What kind of carton construction is acceptable for casegoods? Stapled RSC only Glue and tape sealed telescoping or FPF (five panel folder) Open box Shrink wrap6. What type of filler MUST be used to protect glass, marble, or stone? Styrofoam only Foam corners only Flat plastic sleeves with adequate cushioning No filler needed7. What kind of streamer must be attached to inner cartons with hardware? Yellow streamer Blue streamer Red hardware streamer No streamer needed8. What must be included in the package when assembly hardware is present? Just hardware Assembly instructions Extra stickers Warranty card only9. If a product has glass panels, what type of sticker must be used? Line to Ground Fragile Handle With Care Top Load Only Keep Dry10. How should inner cartons for parts be packed? Loose inside the box Tightly secured, labeled, and unable to move Just thrown in Taped to the product Submit Quiz Return to Packaging Menu